My main interest was to program the GMRS channels into the radio to be used in channel mode, and in CHIRP this is easy to do by selecting Radio -> Import from stock config -> US FRS and GMRS Channels and then uploading to the radio. Then select Program -> Read from radio and you should be able to extract data from your device. Do not worry – there is English interface available, to switch to it, click on the second-last menu and select English from the drop-down. There were also files named WP970I_CPS, WP970Setup I am not sure in which ways they are different from the one I downloaded.Īfter installation, it launches with all-Chinese interface, which on my Windows installation resulted in question marks for all menu names and menu items. I downloaded the file named “WP970I Setup”, mainly because it specified Chinese/English as language. This software can be downloaded from Baofeng: go to and select Download -> Programming Software. CHIRPĬHIRP is easy: once you’ve figured out the COM port where the radio is listening, select UV-82WP as the radio model, and it should work. It took me some time to figure it out, and here is a summary. There are two ways to connect to the radio. However, if you are connecting the UV5RV2+, or other models, they are listed in the drop down menu. Step 4: The Port will be COM5, the vendor is Baofeng and the BF-F9V2+ will require you to choose BF-F8HP from the model list. ![]() ![]() ![]() I bought a couple of Baofeng UV-9R radios with a computer communication cable, but I could not find instructions on how to program the radios from a computer. Step 3: Open the CHIRP software, click on Radio then choose Download from Radio.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |